Soudal Soudapack WST
SOUDAPACK WST is a one-component, solvent-free, hydro-swelling sealant to prevent water leaks in the inside of pipes. Soudapack WST does not cure but remains permanently flexible, through which additional cables or pipes can be carried through at all times.
SOUDAPACK WST is a one-component, solvent-free, hydro-swelling sealant to prevent water leaks in the inside of pipes. Soudapack WST does not cure but remains permanently flexible, through which additional cables or pipes can be carried through at all times.
- Water-tight, water-vapour-tight, and gas-tight up to 3 bar
- Water impermeable
- Swells in contact with water – to prevent leaking
- Immediate seal of leaks
- Does not harden
Additional Downloads
Specifications
| Packaging | 310 ml cartridges, 12 cartridges / carton |
| Colour | Yellow |
Features & Applications
Features
- Watertight up to 3 bar
- Gas-tight up to 3 bar
- Permanently flexible
- Immediate seal of leaks
- No adhesive layer needed
- No vapours, no solvents
- Swells in contact with water
- Water-impermeable
- Does not harden
- Indoor emission level of A+ (very low risk, very low VOC)
- Easy to apply with standard caulking gun
Applications
- Water-tight and gas-tight sealing in and around pipelines and cable penetrations
- Sealing against groundwater and surface water ingress around pipes and cables through wall inlets below ground level
- Sealing of wall penetrations inside building
- Hermetic sealing of horizontal pipe and cable wall inlets
Application Instructions
- In the case of large spaces between pipe and inner walls, back fillings may be required. Use back paddings to create the application depth of minimum 12 cm.
- Soudapack WST should be used on the inside of cable/pipe penetrations for flexible sealing.
- For watertight and gastight seals around (and on the outside of) cable and pipe penetrations, Soudal Aquaswell is recommended.
- A top layer of a water-resistant mortar (Soudaplug ST) to encapsulate Soudapack WST is recommend.
Video
Related Products
Soudal Chemical Anchor CA1400
Chemical Anchor CA1400 is a high-performance, universally applicable 2-component anchoring resin for the tension-free securing of anchoring rods, studs, reinforcing bars, threaded collars, profiles etc. in structural and high-load applications, in both hollow and solid materials.
Soudal Fire Silicone B1 FR
Firesilicone B1 FR is a high quality, neutral, elastic, one-component sealant based on silicones which conforms to the DIN4102 B1 standard for fire retardancy and has a fire rating of up to 4 hours in certain joint configurations (EN 1366 Part 4 – NN713.020 – BS 476/20).
Soudal Silirub AQ Aquarium Silicone
Silirub AQ is a high-quality, elastic one-component joint sealant / adhesive based on silicones for the construction of aquariums and terraria. It has very high adhesive strength and its 100% silicone formulation ensure non-toxicity and non-poisonous properties after curing.
Pereseal 702 High Performance Acrylic Sealant
PERESEAL 702 is a high performance, pure acrylic sealant that is excellent for sealing of aluminium door and window frames and air conditioning and HVAC ducts and systems. It can also be used for general purpose interior and exterior caulking in architectural applications where slight or moderate joint movement is anticipated.